You are here

Calibration and measurement capabilities

acoustics, ultrasound
Interní identifikátor Quantity Calibration and measurement capabilities Measurement conditions Note Technical competence Link
Level of acoustics pressure
  • (40 - 154) dB (re 20 µPa)
    (0.14 - 0.14) dB
  • frequency 251 Hz
CIPM MRA
  • (40 - 154) dB (re 20 µPa)
    (0.14 - 0.14) dB
  • frequency 251 Hz
CIPM MRA
Level of acoustics pressure
  • (90 - 110) dB (re 20 µPa)
    (0.09 - 0.09) dB
  • microphone type LS1P
  • frequency (250 Hz up to 1 kHz)
CIPM MRA
  • (90 - 110) dB (re 20 µPa)
    (0.09 - 0.09) dB
  • microphone type LS1P
  • frequency (250 Hz up to 1 kHz)
CIPM MRA
Level of acoustics pressure
  • (110 - 130) dB (re 20 µPa)
    (0.08 - 0.08) dB
  • microphone type LS1P
  • frequency (250 Hz up to 1 kHz)
CIPM MRA
  • (110 - 130) dB (re 20 µPa)
    (0.08 - 0.08) dB
  • microphone type LS1P
  • frequency (250 Hz up to 1 kHz)
CIPM MRA
pressure sensitivity level
  • (-24 - -28) dB (re 1V/Pa)
    (0.05 - 0.05) dB
  • frequency 63 Hz up to 1,0 kHz
CIPM MRA
  • (-24 - -28) dB (re 1V/Pa)
    (0.05 - 0.05) dB
  • frequency 63 Hz up to 1,0 kHz
CIPM MRA
13.1 Level of acoustics pressure
  • (59.91 - 134.1) dB
    (0.09 - 0.09) dB
  • (re 20.10-6 Pa - )
in relation to frequency and total distortion accreditation
13.1
  • (59.91 - 134.1) dB
    (0.09 - 0.09) dB
  • (re 20.10-6 Pa - )
in relation to frequency and total distortion accreditation
13.2 sensitivity of microphone
  • (-31.08 - -23.92) dB
    (0.05 - 0.05) dB
  • (re 1 V.Pa-1 - )
According to nominal microphone sensitivity value accreditation
13.2
  • (-31.08 - -23.92) dB
    (0.05 - 0.05) dB
  • (re 1 V.Pa-1 - )
According to nominal microphone sensitivity value accreditation
vibration
Interní identifikátor Quantity Calibration and measurement capabilities Measurement conditions Note Technical competence Link
charge sensitivity (magnitude)
  • (0.01 - 600) m•s-2
    (0.5 - 0.5) %
  • frequency 20 Hz up to 1,0 kHz
CIPM MRA
  • (0.01 - 600) m•s-2
    (0.5 - 0.5) %
  • frequency 20 Hz up to 1,0 kHz
CIPM MRA
charge sensitivity (magnitude)
  • (0.01 - 600) m•s-2
    (0.8 - 0.8) %
  • frequency >1,0 kHz up to 5 kHz
CIPM MRA
  • (0.01 - 600) m•s-2
    (0.8 - 0.8) %
  • frequency >1,0 kHz up to 5 kHz
CIPM MRA
nábojová citlivost citlivost (magnituda)
  • (0.01 - 600) m•s-2
    (0.5 - 0.5) %
  • frequency 20 Hz up to 1,0 kHz
CIPM MRA
  • (0.01 - 600) m•s-2
    (0.5 - 0.5) %
  • frequency 20 Hz up to 1,0 kHz
CIPM MRA
nábojová citlivost citlivost (magnituda)
  • (0.01 - 600) m•s-2
    (0.8 - 0.8) %
  • frequency >1,0 kHz up to 5 kHz
CIPM MRA
  • (0.01 - 600) m•s-2
    (0.8 - 0.8) %
  • frequency >1,0 kHz up to 5 kHz
CIPM MRA
5.1 efektivní hodnota zrychlení přímočarých mechanických vibrací harmonického průběhu
  • (0.01 - 400) m•s-2
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service accreditation
5.1
  • (0.01 - 400) m•s-2
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service accreditation
5.1 efektivní hodnota zrychlení přímočarých mechanických vibrací harmonického průběhu
  • (0.01 - 400) m•s-2
    (1.5 - 1.5) % MH
  • frequency (>5,0 up to 20) kHz
internal and external metrology service accreditation
5.1
  • (0.01 - 400) m•s-2
    (1.5 - 1.5) % MH
  • frequency (>5,0 up to 20) kHz
internal and external metrology service accreditation
5.2
  • (0.01 - 1000) pC/m•s-2
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2 citlivost snímačů vibrací v pásmu frekvencí
  • (0.01 - 1000) pC/m•s-2
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2 citlivost snímačů vibrací v pásmu frekvencí
  • (0.01 - 1000) pC/m•s-2
    (1.5 - 1.5) % MH
  • frequency (5,1 up to 20) kHz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2
  • (0.01 - 1000) pC/m•s-2
    (1.5 - 1.5) % MH
  • frequency (5,1 up to 20) kHz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2 citlivost snímačů vibrací v pásmu frekvencí
  • (0.01 - 1.0E+4) mV/m•s-2
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2
  • (0.01 - 1.0E+4) mV/m•s-2
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2 citlivost snímačů vibrací v pásmu frekvencí
  • (0.01 - 1.0E+4) mV/m•s-2
    (1.5 - 1.5) % MH
  • frequency (5,1 up to 20) kHz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2
  • (0.01 - 1.0E+4) mV/m•s-2
    (1.5 - 1.5) % MH
  • frequency (5,1 up to 20) kHz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2 citlivost snímačů vibrací v pásmu frekvencí
  • (0.1 - 1.0E+4) mV/m•s-1
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2
  • (0.1 - 1.0E+4) mV/m•s-1
    (1 - 1) % MH
  • frequency (0,1 up to 5000) Hz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2 citlivost snímačů vibrací v pásmu frekvencí
  • (0.1 - 1.0E+4) mV/m•s-1
    (1.5 - 1.5) % MH
  • frequency (5,1 up to 20) kHz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.2
  • (0.1 - 1.0E+4) mV/m•s-1
    (1.5 - 1.5) % MH
  • frequency (5,1 up to 20) kHz
internal and external metrology service, it is possible to specify in pC/g, resp. mV/g, where 1 g = 9,81 m.s-2 accreditation
5.3
  • (1.0E-7 - 1.0E+7) V/V
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.3 transfer function of amplifier and filter by simulator
  • (1.0E-7 - 1.0E+7) V/V
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.3
  • (0.001 - 1000) mV/pC
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.3 transfer function of amplifier and filter by simulator
  • (0.001 - 1000) mV/pC
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.4
  • (0.01 - 1.0E+4) m•s-2
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.4 acceleration
  • (0.01 - 1.0E+4) m•s-2
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.4
  • (0.1 - 1000) mm•s-1
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.4 speed
  • (0.1 - 1000) mm•s-1
    (0.5 - 0.5) % MH
  • frequency (0,1 up to 100000) Hz
internal and external metrology service accreditation
5.5 acceleration of mechanical shock of half-sine form
  • (1 - 1.0E+5) m•s-2
    (1.2 - 1.2) % MH
internal metrology service accreditation
5.5
  • (1 - 1.0E+5) m•s-2
    (1.2 - 1.2) % MH
internal metrology service accreditation
5.6
  • (5 - 220) km•h-1
    (0.2 - 0.2) km•h-1
internal and external metrology service accreditation
5.6 Speed of road transportation vehicles and other objects
  • (5 - 220) km•h-1
    (0.2 - 0.2) km•h-1
internal and external metrology service accreditation
5.6
  • (5 - 300) km•h-1
    (0.2 - 0.2) km•h-1
internal and external metrology service accreditation
5.6 Speed of road transportation vehicles and other objects
  • (5 - 300) km•h-1
    (0.2 - 0.2) km•h-1
internal and external metrology service accreditation
5.6 Speed of road transportation vehicles and other objects
  • (1 - 999) km•h-1
    (0.2 - 0.2) km•h-1
internal and external metrology service accreditation
5.6
  • (1 - 999) km•h-1
    (0.2 - 0.2) km•h-1
internal and external metrology service accreditation
5.6 Speed of road transportation vehicles and other objects
  • (0 - 320) km•h-1
    (0.01 - 0.01) % MH
  • laboratory temperature, temperature for external services  (-20 up to +45) °C
internal and external metrology service accreditation
5.6
  • (0 - 320) km•h-1
    (0.01 - 0.01) % MH
  • laboratory temperature, temperature for external services  (-20 up to +45) °C
internal and external metrology service accreditation
5.7
  • (0.1 - 1.0E+4) Hz
    (0.01 - 0.01) % MH
internal metrology service accreditation
5.7 frekvence vibrací
  • (0.1 - 1.0E+4) Hz
    (0.01 - 0.01) % MH
internal metrology service accreditation
5.8 revolution and pulse
  • (0.01 - 1.0E+5) min-1
    (0.01 - 0.01) MH
internal metrology service, it is possible to specify in Hz accreditation
5.8 revolution and pulse
  • (0.01 - 1.0E+5) min-1
    (0.01 - 0.01) MH
internal metrology service, it is possible to specify in Hz accreditation
5.8 revolution and pulse
  • (0.01 - 1.0E+7) min-1
    (1.0E-10 - 1.0E-10) MH
internal metrology service, it is possible to specify in Hz accreditation
5.8 revolution and pulse
  • (0.01 - 1.0E+7) min-1
    (1.0E-10 - 1.0E-10) MH
internal metrology service, it is possible to specify in Hz accreditation
5.9 revolution and pulse
  • (0.01 - 1.0E+5) min-1
    (0.01 - 0.01) MH
external metrology service, it is possible to specify in Hz accreditation
5.9 revolution and pulse
  • (0.01 - 1.0E+5) min-1
    (0.01 - 0.01) MH
external metrology service, it is possible to specify in Hz accreditation
5.9 revolution and pulse
  • (0.01 - 1.0E+7) min-1
    (1.0E-5 - 1.0E-5) MH
external metrology service, it is possible to specify in Hz accreditation
5.9 revolution and pulse
  • (0.01 - 1.0E+7) min-1
    (1.0E-5 - 1.0E-5) MH
external metrology service, it is possible to specify in Hz accreditation
5.10 Linear motion velocity
  • (0 - 1000) m•s-1
    (0.01 - 0.01) % MH
internal metrology service accreditation
5.10 Linear motion velocity
  • (0 - 1000) m•s-1
    (0.01 - 0.01) % MH
internal metrology service accreditation
5.11 Linear motion velocity
  • (0 - 1000) m•s-1
    (0.1 - 0.1) % MH
external metrology service accreditation
5.11 Linear motion velocity
  • (0 - 1000) m•s-1
    (0.1 - 0.1) % MH
external metrology service accreditation
5.12 Linear motion acceleration
  • (-200 - 200) m•s-2
    (0.01 - 0.01) % MH
internal metrology service accreditation
5.12 Linear motion acceleration
  • (-200 - 200) m•s-2
    (0.01 - 0.01) % MH
internal metrology service accreditation
5.13 Linear motion acceleration
  • (-100 - 100) m•s-2
    (0.05 - 0.05) % MH
external metrology service accreditation
5.13 Linear motion acceleration
  • (-100 - 100) m•s-2
    (0.05 - 0.05) % MH
external metrology service accreditation