You are here

CMC in field "length"

Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
1.1 (0 - 10) mm 0,9 µm 151-MP-C003
1.1 (10 - 50) mm 1,3 µm 151-MP-C003
1.1 (50 - 1000) mm 20 µm 151-MP-C003
1.2 (0 - 10) mm 0,9 µm 151-MP-C005
1.2 (10 - 50) mm 1,3 µm 151-MP-C005
1.2 (50 - 1000) mm 20 µm 151-MP-C005
Quantity: length difference D
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/18 (-10 - 10) µm Q[32; 2D], D in µm nm
  • max gauge block length 100 mm
633-MP-C005
Quantity: středová (osová) délka L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/19 (0.3 - 300) mm Q[20; 0,2L], L in mm nm 411-MP-C001
CMI/20 (0.3 - 100) mm Q[50; 0,5L], L in mm nm 633-MP-C003
CMI/21 (100 - 1000) mm Q[50; 0,53L], L in mm nm 633-MP-C003
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
1.3 (0.3 - 1000) mm 0,05+0,5×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,1+1×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,2+2×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,5+5×L µm 633-MP-C003
1.4 (0.3 - 1000) mm 0,032 µm
  • range of comparation  ±0.01 mm
633-MP-C005
1.6 (0 - 500) mm 0,8 + 5,0×L µm 633-MP-C008
1.7 (0 - 1000) mm 10,0 + 0,5×L µm 633-MP-C009
1.8 (0 - 1) m 0,3+0,4×L µm 633-MP-C029
1.16 (0 - 30) m 7 mm 431-MP-C003
1.16 (5 - 100) cm 0.2 mm 431-MP-C003
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
1.6 (0 - 500) mm 0,8 + 5,0×L µm 633-MP-C008
1.7 (0 - 1000) mm 10,0 + 0,5×L µm 633-MP-C009
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
1.6 (0 - 500) mm 0,8 + 5,0×L µm 633-MP-C008
1.7 (0 - 1000) mm 10,0 + 0,5×L µm 633-MP-C009
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
1.3 (0.3 - 1000) mm 0,05+0,5×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,1+1×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,2+2×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,5+5×L µm 633-MP-C003
1.6 (0 - 500) mm 0,8 + 5,0×L µm 633-MP-C008
1.7 (0 - 1000) mm 10,0 + 0,5×L µm 633-MP-C009
1.8 (0 - 1) m 0,3+0,4×L µm 633-MP-C029
1.9 (0.005 - 150) mm 1,0 + 4,0×L µm 633-MP-C102
1.11 (0 - 600) mm 1,2 + 2,5×L µm 633-MP-C104
1.14a (0 - 100) m Q(62+21,75L) µm 815-MP-C510
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
1.1 (0 - 10) mm 0,9 µm 151-MP-C003
1.1 (10 - 50) mm 1,3 µm 151-MP-C003
1.1 (50 - 1000) mm 20 µm 151-MP-C003
1.2 (0 - 10) mm 0,9 µm 151-MP-C005
1.2 (10 - 50) mm 1,3 µm 151-MP-C005
1.2 (50 - 1000) mm 20 µm 151-MP-C005
Quantity: error of indicated size and displacement L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/14 (0 - 6) m Q[0,05;1,5L]; L in m µm 633-MP-C006
Quantity: středová (osová) délka L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/20 (0.3 - 100) mm Q[50; 0,5L], L in mm nm 633-MP-C003
CMI/21 (100 - 1000) mm Q[50; 0,53L], L in mm nm 633-MP-C003
Quantity: tloušťka D
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/32 (0.0001 - 0.5) m Q[0,4; 2,6D], D in m µm 633-MP-C029
CMI/35 (0.0015 - 0.3) m Q[0,4; 2,6D], D in m µm 633-MP-C029
CMI/37 (0.001 - 0.135) m Q[0,4; 2,6D], D in m µm 633-MP-C029
Quantity: external cylinder
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/65 (0 - 2) mm Q[25,10*R], R in µm nm
  • cylinder diameter D up to 355 mm
633-MP-C103
Quantity: internal cylinder
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/66 (0 - 2) mm Q[25,10*R], R in µm nm
  • cylinder diameter D from 3 to 355 mm
633-MP-C103
Quantity: straightness S
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/51 (0 - 1.5) mm Q[0.7,1L,11S], L in m, S in mm µm
  • length L up to 15 m
633-MP-C006
Quantity: pitch diameter
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/55 (0.75 - 6) mm pitch 3 µm 633-MP-C029
CMI/57 (0.75 - 6) mm pitch 3 µm 633-MP-C029
Quantity: pitch P
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/56 (0.75 - 6) mm pitch 0.5 µm 633-MP-C029
CMI/58 (0.75 - 6) mm pitch 0.5 µm 633-MP-C029
Quantity: roundness R
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/67 (0 - 2) mm Q[25,10*R], R in µm nm
  • sphere diameter D up to 355 mm
633-MP-C103
1.10 (-2 - 2) mm µm
  • diameter 355 mm
633-MP-C103
Quantity: rovinnost F
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/47 (0 - 1.5) mm Q[0,5;1M•M; 25F]; M in m, F in mm µm
  • dimensions : M is diagonal in [m] (0.2 m x 0.3 m) to (4 m x 10 m)
633-MP-C006
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
1.3 (0.3 - 1000) mm 0,05+0,5×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,1+1×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,2+2×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,5+5×L µm 633-MP-C003
1.4 (0.3 - 1000) mm 0,032 µm
  • range of comparation  ±0.01 mm
633-MP-C005
1.5 (0 - 20) m 0,01+0,2×L µm 633-MP-C006
1.6 (0 - 500) mm 0,8 + 5,0×L µm 633-MP-C008
1.7 (0 - 1000) mm 10,0 + 0,5×L µm 633-MP-C009
1.8 (0 - 1) m 0,3+0,4×L µm 633-MP-C029
1.9 (0.005 - 150) mm 1,0 + 4,0×L µm 633-MP-C102
Quantity: straightness and parallelism
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
1.10 (-2 - 2) mm µm
  • vertical way 200 mm
633-MP-C103
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
1.1 (0 - 10) mm 0,9 µm 151-MP-C003
1.1 (10 - 50) mm 1,3 µm 151-MP-C003
1.1 (50 - 1000) mm 20 µm 151-MP-C003
1.2 (0 - 10) mm 0,9 µm 151-MP-C005
1.2 (10 - 50) mm 1,3 µm 151-MP-C005
1.2 (50 - 1000) mm 20 µm 151-MP-C005
1.3 (0.3 - 1000) mm 0,05+0,5×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,1+1×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,2+2×L µm 633-MP-C003
1.3 (0.3 - 1000) mm 0,5+5×L µm 633-MP-C003
Quantity: vacuum wavelength, l0
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/1 (633 - 633) nm 6,7 am 814-MP-C402
CMI/3 (543 - 543) nm 5.4 am 814-MP-C404
CMI/4 (633 - 633) nm 1.0E-9 814-MP-C402
CMI/6 (543.5 - 543.5) nm 1.0E-9 nm 814-MP-C404
CMI/7 (400 - 1650) nm 2.0E-6 814-MP-C407
CMI/8 (400 - 1000) nm 1.0E-5 nm 814-MP-C407
CMI/64 (532 - 532) nm 2 am 814-MP-C404
CMI/73 (520 - 1064) nm 2.0E-13 rel
  • measurement time 24 h
814-MP-C409
CMI/73 (281 - 576) THz 2.0E-13 rel
  • measurement time 24 h
814-MP-C409
Quantity: absolute frequency
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/1 (474 - 474) THz 5 kHz 814-MP-C402
CMI/3 (551 - 551) THz 5.5 kHz 814-MP-C404
CMI/64 (563 - 563) THz 2.3 kHz 814-MP-C404
CMI/72 (1541 - 1542) nm 80 am 814-MP-C404
CMI/72 (194.4 - 194.5) THz 10 kHz 814-MP-C404
Quantity: error of prescribed displacement L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/9 (0 - 4.185E+4) m Q[0,001; 0,1L], L in m µm 814-MP-C405
Quantity: wavelength compensation n
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/10 (1 - 1) 1E-7n -
  • pressure, temperature, relative humidity 800 hPa up to 1060 hPa, 5 °C up to 35 °C, 20 % up to 80 %
814-MP-C405
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/68 (100 - 1020) mm Q[70; 85L], L in m nm 814-MP-C406
Quantity: pitch P
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/69 (0.27 - 10) µm Q[0,05; 0,2P], P in µm nm 814-MP-C408
Quantity: thermal expansivity α
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/70 (-1.0E-5 - 3.0E-5) 1/K Q[6E-9/L, 20E-9, 8E-4*α], L in m, α in 1/K 1/K
  • length L 10 mm to 1020 mm
814-MP-C406
Quantity: line spacing L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/74 (0.01 - 200) mm Q[28; 0,377 L], L in mm nm 814-MP-C405
CMI/75 (200 - 500) mm Q[68; 0,213 L], L in mm nm 814-MP-C405
Quantity: error of indicated [vertical size, displacement] L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/15 (0 - 0.72) m Q[0,5; 0,8L], L in m µm 815-MP-C503
Quantity: face spacing L
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/22 (10 - 720) mm Q[0,3; 0,6L], L in mm nm 815-MP-C503
Quantity: diameter
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/30 (3 - 100) mm 0.5 µm 815-MP-C503
CMI/33 (3 - 150) mm 0.5 µm 815-MP-C503
Quantity: tloušťka D
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/31 (0.003 - 0.5) m Q[0,8; 1,3D], D in m µm 815-MP-C503
CMI/34 (0.0003 - 0.5) m Q[0,8; 1,3D], D in m µm 815-MP-C503
CMI/36 (0.001 - 0.5) m Q[0,8; 1,3D], D in m µm 815-MP-C503
Quantity: external cylinder
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/48 (0 - 0.5) mm Q[0,8; 1,3D], D in m µm
  • cylinder diameter D up to 0.5 m
815-MP-C503
Quantity: internal cylinder
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/49 (0 - 0.5) mm Q[0,8; 1,3D], D in m µm
  • cylinder diameter D up to 0.5 m
815-MP-C503
Quantity: roundness
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/50 (0 - 0.5) mm Q[0,8;1,3D], D in m µm
  • sphere diameter D up to 0.5 m
815-MP-C503
Quantity: centre coordinates [hole, bore]
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/59 (100 x 100 - 700 x 700) mm x mm Q[0,8;1,1L], L in m µm
  • L is centre distance [m] 
815-MP-C503
CMI/60 (100 - 700) mm Q[0,5; 0,8L], L in m µm
  • L is centre distance [m] 
815-MP-C503
Quantity: error of indicated location
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
CMI/61 (0 - 700) mm Q[0,5; 0,8L], L in m µm
  • measured distance L up to 30 m
815-MP-C503
Quantity: 3-D size, shape
Interní identifikátor Range Calibration and measurement capabilities Procedures
CMI/62 (3 - 100) mm 0.25 µm 815-MP-C503
Quantity: central length
Interní identifikátor Range Calibration and measurement capabilities Measurement conditions Procedures
1.5 (0 - 20) m 0,01+0,2×L µm 633-MP-C006
1.12 (0.4 - 2.5) m Q(0,6 + 0,8×L) µm 815-MP-C501
1.12 (0 - 30) m Q(0,01; 0,4×L; 0,1aL) µm 815-MP-C501
1.12 (0.3 - 1) m 0,3;0,6×L µm
  • thermal expansion α (0..15)E-6/K
815-MP-C501
1.12 (0.01 - 2.5) m Q(0,8; 1,4×L) µm 815-MP-C501
1.12 (0 - 1.4) m Q (0,2; 0,8×L) µm 815-MP-C501
1.12 (0 - 0.2) m Q(0,5 + 0,8×L) µm 815-MP-C501
1.13 (0 - 1020) mm U3: (0,6 + 0,8×L) µm 815-MP-C503
1.14 (0.3 - 30) m Q(100;3×L) µm 815-MP-C510
1.14 (0 - 300) m Q(20;20×L) µm 815-MP-C510
1.15 (0 - 1020) mm Q (0,2; 0,8×L) µm 815-MP-C511
1.20 (0 - 1800) mm 15 µm 815-MP-C502
1.20 (0 - 1800) mm 13 µm 815-MP-C502